Polypropylene tanks by Bailiff Enterprises · Willis, Texas936-228-1520
Menu

SULFURIC ACID 10% to 75% & Polypropylene Compatibility

Sulfuric Acid (H2SO4) is a very corrosive, very dense, oily liquid. It can range from colorless to dark brown depending on its purity and used in the manufacture a huge variety of substances including chemicals, fertilizers, paints, detergents, and explosives. Sulfuric Acid is also referred to as oil of vitriol and vitriol.

PVDF temperature limit: 200°F (95°C). That is Arkema’s maximum use temperature for Kynar Flex® 2850 PVDF, the resin we mold, with Sulfuric Acid (60-93% in water). Arkema’s limits are for solid resin at atmospheric pressure and do not account for mixtures. Source: Arkema Kynar® PVDF chemical resistance chart. Confirm your application with Bailiff before ordering.

At a glance

HDPE is the most economical tank material for SULFURIC ACID 10% to 75%, rated Excellent. Polypropylene and PVDF (Kynar®) are also rated Good or better. Avoid nylon tanks; 316 stainless steel and titanium hardware.

  • Excellent No or minor effect. Recommended.
  • Good Slight effect. Generally suitable.
  • Fair Moderate effect. Limited or conditional use — contact us.
  • Not Recommended Severe effect. Do not use.
  • No Data Not tested. Contact us before use.

Tank Resins

How SULFURIC ACID 10% to 75% works with the plastics used to make our storage tanks.

Material Relative cost Rating
HDPE $ Excellent
Polypropylene $$ Excellent
Nylon $$$ Not Recommended
PVDF (Kynar®) $$$$ Excellent

Fittings

How SULFURIC ACID 10% to 75% works with the plastics used for tank fittings.

Material Rating
HDPE Excellent
PVC Excellent
CPVC Excellent
Polypropylene Excellent
PVDF Excellent

Gaskets & O-Rings

How SULFURIC ACID 10% to 75% works with gasket and O-ring materials.

Material Rating
Buna-N Good
EPDM Good
Viton® Excellent

Metals

How SULFURIC ACID 10% to 75% works with the metals used for fittings and bolts.

Material Rating
316 Stainless Steel Not Recommended
Hastelloy Good
Titanium Not Recommended
Aluminum No Data

Request a Polypropylene Tank Quote

Storing this chemical in polypropylene?

Tanks & Fittings Built for It

Polypropylene tanks from 25 to 6,000 gallons with polypropylene fittings installed. Confirm concentration and temperature with us before you order.

Shop Polypropylene TanksAll Compatible Chemicals

Tell Us What You’re Storing

Send the chemical, concentration, temperature and size. We’ll match the tank and fittings and send a quote.

Request a Quote936-228-1520